Posts tagged boost

Boost Mobile and Cell Phone FAQ RepeaterCe need to know before buying a signal booster cell phone / cell phone repeater – is what a mobile phone repeater system A typical system from an external antenna, an amplifier, a AC or DC required? an internal antenna. The antenna inside is sometimes attached to the amplifier with less powerful systems.

work as cell phone repeater? for incoming calls, the external antenna, called the “donor” antenna picks up the signal, stimulating them and sends them to the amplifier via a coaxial cable that connects the two devices together. The amplifier amplifies the signal again, and the wireless projects in a given area of the antenna inside. vice versa for outgoing calls the sequence.

What is a cell signal? mobile phone signals, such as radio and television signals are high frequency signals or waves. Technically, they are electromagnetic waves.

What are the frequencies of cell phones? are the levels of radio frequency. The FCC controls the airwaves in America and approved by different frequencies for each service provider or carrier. Typically 800 MHz to 894 MHz and 1850 MHz to 1990 MHz for Canada, North America and South America are reserved. The 800 MHz and 1800 MHz reserved for other continents.

Why can not I have a cell phone signal in a building? radio signals at the cellular level, just do not penetrate solid materials denser than, say, plasterboard. They do not penetrate asphalt shingles or concrete, radiant barrier, brick or wood self cardboard types. If you have a cell phone or a PC card can use the air in a building, it is likely because it is close enough to the cell tower and is located so that the signals pass through curtained windows, non-colored.

Do you have a good signal outside the cheapest solution is a high-gain antenna 9 dBi Blackcat as our set! on the window sill inside and connect it directly to your phone card withan made for this. If your phone does not have an external port, your solution is probably a signal booster cell phone / wireless repeater system, as desktop kit Wilson Repeater, the signals to a surface, there are therefore no need for the antenna connection on your phone .

In the United States, uses cell phone frequencies? In most cases with Sprint and Tmobile 1900 MHz. ATT, Verizon and Alltel both 850 MHz and 1900 MHz. Nextel, the walkie-talkie part of the Sprint / Nextel uses 806/866 MHz.

What is the mobile phone abbreviations mean? They refer to different numerical code-reading technology for mobile phones and air cards, computer / data cards. See below:

CDMA Code-Division Multiple Access (CDMA) is a digital wireless service, with data speeds of 40 to 144 Kbit / s transfers. Unlike GSM, which assigns a specific frequency to each user CDMA uses all channels to use the entire palette.

EDGE: Enhanced Data for Global Evolution (EDGE) is a fast-GSM, provide the data rates can be up to 384 Kbps. It is based on GSM and CDMA-based applications.

EV-DO: Evolution Data Optimized (EV-DO) technology is a high-speed wireless data connection in the CDMA network. This technology allows users to access high-speed Internet through mobile devices up to 3.1 Mbps.

GPRS: General Packet Radio Service (GPRS) is a packet oriented Mobile Data Service for 3G phones. kbit This data rate provides 56-114 / s and we used to services like Wireless Application Protocol (WAP) access, Short Message Service (SMS), Multimedia Messaging Service (MMS) and Internet communication services such as e-mail and World Wide Web access .

GSM: Global System for Mobile Communications (GSM) is a digital cellular system that uses TDMA can share a frequency of more calls and simultaneous channels of data

HSDPA: High-Speed Downlink Packet Access (HSDPA ) is a 3G (third generation) mobile data code reading in the HSPA family, in cooperation with UMTS higher data transmission speeds and capacity. Current HSDPA deployments support downlink speeds of 1.8, 3.6, 7.2 and 14.4 Mbit / s.

For operational reasons, service providers can increase the speed to a rate below the typical maximum of 3, Limit 6 Mbit / s that most phones support HSDPA. Calls are usually given priority over data transmission.

IDEN: Integrated Digital Enhanced Network (IDEN) uses TDMA technology to provide wireless voice, messaging, digital radios and data transfer

<. p> PCS: Personal Communication Services (PCS) is a second generation of mobile communications technology known as digital mobile telephony. The digital service that works on CDMA and TDMA interfaces in the frequency range of 1900 MHz. Sometimes people think a product is Sprint PCS, they were in fact want to use one of the first companies in America, it.

UMTS: Universal Mobile Telecommunications System is a third generation of mobile data reading Code technology. It is in the United States and Canada used by ATT. Currently, the most common form of UMTS uses WCDMA as the air interface wave behind it. Some see mobile phones and smart cards in air computer screen, if UMTS WCDMA in use. Technically, they would both be in use.

The company operates GSM interfaces. UMTS, W-CDMA, supports up to 14.0 Mbit / s transfer rate theory (with HSDPA), although users can now expect to use in networks, with a transfer rate up to 384 kbit / s for R99 phones and 7.2 Mbps / s for HSDPA handsets in the downlink.

W-CDMA W-CDMA (Wideband Code Division Multi access, for example) is a kind of digital GSM mobile network. W-CDMA technology is a broadband digital broadcast spectrum, the data rates achieved a higher and supports multiple users. With W-CDMA UMTS supports up to 14.0 Mbit / s transfer rate theory (with HSDPA), although users can expect to use in networks where a transfer rate of up to to 384 kbit / s for R99 phones and 7.2 Mbit / s for HSDPA handsets in the downlink.

Is there a “passive repeater cell phone? No, although some people to make or sell, they claim. The radio frequency energy or to repeat push. This is what the cell phone towers relay towers. They require large amounts of energy (for the size of the cable look at one), such as radio and television towers. When the power was not necessary to push the signal, your service provider would only need one round to serve the world. In other words, if worked “passive” repeater, it would be to “activate” no need to be.

How far to transmit a cell phone signal repeater? It depends on a number of things: the power of the signal outside the area where the antenna is installed outside of the cell phone repeater, the gain of the antenna, amplifier, the length of the cables are used and how often you want to support . To calculate the coverage area for your application, you call us and we will do it for you.

How do I know who buy items for a mobile repeater? It depends on a number of things: the power of the signal outside the area where the antenna is installed outside the repeater, the gain of the antenna, amplifier, the length of the cable used and the frequency of the helping hand you .

To make it easier for our customers, we have assembled cellular amplifier / repeater cell phone kits for the construction and mobile use. The cellular repeater system for the area between most homes and small offices is the model of Wilson 801 245 B. To all kits relay system for building, click here.

to see our wireless repeater system for most vehicles and small boats, the Wilson-model 801 201 B order, click on our system repeater and amplifier kits for cars, trucks, RVs and boats here. To calculate the coverage area for your application -. Call us at 888-713-1243 and outside we do it for you

Then a cell relay system to stimulate a weak signal? Yes. But the establishment of a cell phone amplifier / repeater cell, it is not to try for the amateur. It is a normal part of our business to call us if this applies to you and your situation.

My neighbor can use his cell phone inside, why can not I? For the same reason that you on your cell phone on one side of the road and can not talk to another. Your home may be the signal by a tree (s), it can be blocked from his house are blocked, it is at low level and, of course, they can have another service, more with a tower.

Why I am a good sign for the winter, but not in spring and summer? between you and the trees leaves, the more likely. You can probably solve this problem by using a Yagi antenna to a level to “see” allow him the signals, which happened to be raised Pol. Normally, between 50% -75% up to the height of the trees, she cleared enough for you to find a quiet corner. They will then either the Yagi directly to your phone when the connection port or card needed air, has connection to an amplifier in a wireless repeater system or a connection to Wilson 811 210 amplifiers that produce the devices, even if not otherwise required for direct connection.

How can I get a cell signal in my office in the 20th Stock? three-way, provided you have a good signal outside, on the ground. One set, our BlackCat! antenna on the floor, table, shelf, etc., next to the window and connect it directly to the phone if it has the necessary connection port, connect the BlackCat! with a Wilson antenna amplifier model 811 210, can make the devices even when not otherwise required for direct connection, or use the Wilson-model 801 245 Desktop System is a wireless repeater, a kit designed specifically for such applications .

cellular repeater legal? Wilson and is the only brand we carry. Legal and approved by the FCC.

Will audio / video coaxial cable with a cellular repeater? No, there is a cable of 75 ohms and resistant cell uses 50 ohms. It has the wrong plug and loses too much to win.

What type of coaxial cable for a mobile repeater to use? LMR400 or 9913th

What is the profit loss of LMR400 and 9913? 3.9 dB @ 850 MHz and 6.5 MHz @ 1900th RG8X loses about twice the loss and RG58 loses about 4 times the loss.

How can I use coax

Who is the best amplifier makes cell phone repeater? According to the third party verification of test results, Wilson Electronics amplifiers for the consumer.

Why Yagi vs omni-directional for cellular repeater? Yagi antennas are about double win as omni-directional mobile antennas. In addition, any gain Yagi antenna is oriented in one direction, and that collect items and keep the best signal, so it is more efficient. It can therefore be used over a coaxial cable with a Yagi antenna from an omni-directional antenna.

Then, in a cellular repeater with multiple antennas are used? Yes. How much depends on many factors in determining the range of the system with a single antenna is used inside. We recommend not guess things. Call us and we will run the forms free of charge for you -. 888-713-1243

more than one service can be covered with a unique mobile repeater? Yes. This is something we do every day, for our customers. The cost is increased with the addition of any service. In reporting on the four key suppliers, increased costs can be substantial.

Nextel May in the same building with other companies to be repeated from 800 MHz? Yes, no matter what you hear. It requires some knowledge and experience to design the system, but it is as EZ to install than others. We make these kind of applications for our regular customers.

repeater is a special need for new phones in the Sprint Nextel / Cell Hybrid? Yes. Just use to replace the dual-band parallel and the amplifier Wilson Nextel for the standard 800-MHz amplifier. The cost is the same.

How can I my cell phone signal in my RV Wireless? You have a number of options. Some are: back with the Wilson model 901 104 chrome mounting bracket of the Wilson Trucker antenna model 301 101 on the scale or stand on the roof of your RV luggage. Or use the model of Wilson RV Trucker Antenna 301 189, which are installed by a professional service center, since it permanently mounted, which requires drilling a hole in the roof of your RV.

With these antennas you can either connect directly related to the phone, if the necessary connection port or an air card, plug has the BlackCat! 811 210 Wilson antenna with amplifier, can make the devices even when not otherwise required for direct connection, or use the model of Wilson 80 201 mobile repeater system, which is developing a kit to an area of size of an RV driver / passenger area.

If you prefer to phone and / or card have the network coverage of big air in your RV, check out our Wilson model 801 245 zip repeater system, developed by the Head of Technical Department and Wilson tested by him in many RV at the Wilson plant, then by several of our customers.

for less than you can define our BlackCat! antenna on the dashboard, table, shelf, etc., next to the window and connect it directly to the phone, if he has the necessary connection port, or connect to the Wilson 811 210 amplifier that can produce the equipment even if they are not otherwise required for direct connection

What is a cell phone antenna is NMO? This is a permanent antenna requires a hole drilled in the roof, trunk or hood. It comes in two parts: the “pole” or upper part and the “mount” or lower. The mast and mounting hardware as well as above and below the surface to keep safe. The installation of mobile phone masts NMO Wilson came installed with 14 ‘RG58 coaxial cable with a FME connector. An example of a mobile phone is our NMO antenna Wilson model 304203rd

Mobile Repeater