IG-B01A

: Trek Mountain Bike I. For 200, 200W, 250, 250W, 260, 260W, 270, 205, 205W, 255, 255W, 265T, 265WT, 275T, Garmin Nuvi 500, 550, 750, 760 , 770, 780

good idea, but it does not

This seems a good idea for most, it seems be done well, had a camera module, was interesting. The problem is that it is not enough to secure the handlebar tight enough. Once you see the slightest vibration of the rotating thing and the GPS unit on the ground. The traction rubber band, not in the lock lever. Press the plastic lever lock / light after a few more releases, and no locks tired.

When the carrier has secured a screw, that would be good, the rubber band is a failure. Not recommended media.

=========================================== === = p =====================

perfect

I bought this for my GPS to take off on my cycle. Most of what I found on the square, a semi perminent. This device is going on and comes out very easily. I think it is robust enough to function perfectly on the bike and allows me to remove it and put it in the bag when not in use.

=========================================== === p = p =====================<> GPS Mount

Happy Mount s not just for me worked. Finally I found a magnetic medium, so it would be the unit in the area, right on the dashboard and not exceed.

=========================================== === = p ===================== rubber bands work

I bought this bicycle / motorcycle Mount after reading the reviews say that the GPS is hard to hit a bump. The first thing I did was a knot at the end of two strips of rubber, then slide the loop on the rubber strip on the ball. I then broke the unity on the ball and turned the other loop rubber bands around the device.

I found that my GPS (Nuvi 400), the ball will drop at first, but he stayed there because of the rubber bands to keep him. After some adjustment of rubber bands, he stayed on the ball on the floor, the faces obstacles very large.

I also found the straps to the handlebars to keep the system in place can not be tight enough to do not slide, because the weight is the GPS. To remedy this, I drlled a small hole in the strap through the handle and put a small screw to prevent slipping. This worked well.

Overall, the bike worked, how fit I expected and I enjoyed it with on my bike I have a 30 mile ride on the canals in Phoenix AZ. It seems that the manufacturers have thought about these two obvious problems.

If you have no rubber bands, and you try to put it on a bike, you can expect that your GPS-hop and slide on the floor. The ball is not strong enough.

=========================================== === = p =======================

comfortable, but …. It is better, Super Glue

I use this carrier for two tours. It is easy to remove and well out of my bicycle handlebars and implemented. However, because the ball Garmin standard used in the design of the cradle, I’m always nervous to send a retarder that fly. This concern was confirmed when I ride my bike was displayed and used my bike and fell. The Garmin cradle the ball flies up the mountain. Fortunately, the bike was in the grass, so that no damage occurred to the GPS. But when he hit a curb, he could be toast. Of course, you can request that no editing is perfect and it uses the standard cradle Garmin question. So you do not get to spend too much money on your GPS on the bike. But I would not want you to use again if I glued the birthplace of the mountain. I find it a good solution. Unfortunately for me there is no substitute weighing on the market for the 500 Nuvi. You can find a replacement for the 200 series cheap on ebay. Because I need nüvi 500 from the cradle to the car, I can not add, so I ordered a cradle Ram and bike mount. I know, the birthplace of Ram is safe because I was on my

Honda Silverwing use

More IG-B01A. I. Trek Garmin Bike Mount for 200, 200W, 250, 250W, 260, 260W, 270, 205, 205W, 255, 255W, 265T, 265WT, 275T, 500, 550, 750, 760, 770, 780,

GPS Mounts