The function of a microscope is affected by several factors such as age, level of use, quality / origin / manufacturer, behavior and responsibility of the user during use.

microscope not good in the following sections:

1 Microscope body part / body, in the button of the counter where the macro tube lens is attached. The pipe will always fall to the ground so that the development of observation can not be achieved. While in the microscopic electric meter key macro / micro-meter at the bottom of the body / subject under the table is also too often.

Other body parts of a microscope are often hinges are damaged, unifying / bond between the microscope body and feet (where the optical microscope), often too loose, and adjustments to the microscope system weakened, so that each part is less powerful microscope.

2 Part

Lens Lens is part of a very sensitive microscope. The lens can be objective. This part is very sensitive to environmental influences. The user environment and where the microscope is recorded very influential on the cleanliness of the lens.

In general, eye lens consists of two layers of the lens (from top to bottom) together. Lenses range from two layers of glass up to four or five layers of glass in it, depending on the size of the extension.

3 Current system (for the type of electric microscope)

Electric microscope is a microscope that reflect its light source uses an electrical current. The damaged parts are often a source of supply, fuse, peppery system / routine down, the lights, and other components.

These include three general damages. In practice, however, there are other parts of the microscope can also be damaged.


Microscope lens