So you have to decide on satellite radio for your car. You have your satellite radio and now new ATI?? S time to implement everything. If youâ? Re donâ feeling overwhelmed?? T worries me?? ATI?? s actually a lot easier than you might expect. Yours? It must first type of connection used to determine your car. If your radio has an FM transmitter, you can make a wireless connection. If not, youâ? He must go to satellite radio on your cara? S radio. Anyway, ATI?? Is very easy to connect when you open the box your new satellite radio, youâ? Check out the main unit, assembly products, magnet and a roof antenna owner? Manual installation instructions. These are the main elements youâ? Ll a standard satellite radio to receive all those involved are the make and model you bought the radio to charge. Steps to install your satellite radio, the first step in installing your radio is on, decide where youâ?? Re will mount the radio. Your radio can be attached to the windshield suction mount or on the dashboard with Velcro. If youâ? Re installation of your dashboard, you keep it tight at the desired location where he went to ATI?? S will be free of any obstructions before the Velcro. Set the camera to the ITA?? S in the range while youâ? Re conduct, but also the way of tours and other controls. If youâ? Re sure it attaches to the windshield, it doesnâ? T impede the view of the road. Then plug the power adapter to your cigarette lighter and plug the other end into the satellite unit. The antenna is changed. The antenna must be in the area outside of the car that has the fewest obstacles to be mounted. In general, the guide that came with your satellite radio system, the details for the operation of the antenna cable in the car to your new system. The type of vehicle you have and identify existing structures, is where you should place the antenna. Setting up a wireless connection if you have a wireless connection, your new device to an FM transmitter. Although this method is part of your new wireless system, the quality of its money? T be as good as youâ? For D with a direct connection. The standard FM transmitter, the transmitter uses a 88th who can not work for your area. You want to have a station thatâ?? S are free from any local radio stations?? If you are between two zones; ITA? Drive? a good idea to find a station thatâ?? s cost in both areas. Once youâ? Ve determined youâ Station? LI use, save, your presets for your satellite radio can easily set only by the touch of a button. With a direct connection, if your satellite radio doesnâ? T has an FM transmitter, youâ? Will be in contact with a cassette adapter for car radio (lower quality), or via the AUX IN or LINE IN connections on your car (better quality). If your device model doesnâ? T with the cassette adapter or audio cable, you must come, please visit the electronics store and buy that works with your device. Place the cassette adapter into your tape player to your car stereo or connect the audio cable into the AUX IN / LINE IN. Then plug the other end into the AUDIO OUT / LINE OUT jack on the back of the satellite unit. Finally, you can hear your car radio with auxiliary input on your satellite radio. Listen to your radio via satellite for the first time after everything connected, turn on your new device and follow the instructions on the screen to complete the installation. After youâ? Re youâ do?? Ll be able to enjoy your new satellite radio for the first time!